The Dojo News

• Some assembly is required, but it does not require mounting.
• Mounting to the floor is optional.
• Stand comes with mounting brackets which are adjustable in height from 5'5" to 6' 5". Just mount your brackets where you need them. For multiple users who require two different height adjustements, you will need to order a second set of brackets.
• Stand is 70" tall x 68" wide x 50" deep
• Finished in Golden Pecan
• Weighs 65 lbs.

• Please see our FAQs for delivery time frames and other common questions.
• Standard dummy body is 61"
• Dummy body is 9" in diameter
• 100% Ash arms measure 12.5" long and are level
• Arm pegs are 1.5" x 2" (much stronger than the standard 1.5" x 1.5")
• Metal 2" leg
• Dummy body is finished in Golden Pecan with Sedona Red arms
• Includes Hardcore JKD symbol in black and red
• Body is interchangeable with any of our stands (sold separately)
• The body is constructed with a 14" deep 4" x 4" hole in the bottom to allow it to be used with any of our stands or to be set onto a post in the ground for outdoor training.
• Weighs approx. 80 lbs.

Designed for the JKD/Mixed Martial Arts practitioner

• Traditional free standing dummy stand
• Some assembly is required, but it does not require mounting.
• Mounting to the floor is optional.
• Stand includes brackets for adjustable height from 5'5" to 6'5". Just mount your brackets where you need them. For multiple users who require two height adjustements, you will need to order second set of brackets.
• Stand is 70" tall x 68" wide x 50" deep
• Weighs 65 lbs.

ABOUT THE DUMMY

• Please see our FAQs for delivery time frames and other common questions.
• The dummy body can also be used with any of our other stands
• The spacing between the arms and leg is the same as the traditional dummy
• Standard dummy body is 61" tall and 9" in diameter
• There is 8.5" from mid arm to upper arm and from mid arm to leg
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Arm pegs are 1.5" x 2"(much stronger than the standard 1.5" x 1.5")
• Our striking head pad works perfectly with the JKD neck
• 3" solid Ash or 2" metal* leg available. Our new Ash legs are rounded rather than square.
• Dummy body weighs 85 lbs.

DUMMY PADS ARE A MUST!

Once you get your dummy, you'll want to get training right away! So, to prevent injury and enable you to go "all out" on your dummy, we suggest purchasing head and body striking pads.

*The metal and ash legs require different sized peg holes, they are not interchangeable (i.e. If you purchase an ash leg and decide later you want metal instead, it will not fit the dummy.)

• The Recoil Reaction Dummy Stand is one of our newest and most exciting training tools weve ever had to offer!
• This patent pending design takes your Wooden Dummy training to the next level by applying tension and recoil to your dummy.
• This stand fits all of our dummies and has the ability to retro-fit any wooden dummy. See dummy stand for instructions.
• There is a height adjustment of 3 to accommodate multiple users or an optional tall stand is available for those over 5 11".
• Little assembly is required and easily mounts to any solid wall or wooden post.
• This is also a great space saving stand. Out of all of our dummies, this one takes up the least amount of room.
• The two main principles this stand offers you is recoil and reaction. Recoil, in that it will always recoil back to the center position after released. This means the deflection of the arms when blocked provide energy back toward you as in defending an actual strike. Reaction, in that you develop faster reflexes due to the fact that the dummy will "hit you back".
• This is an excellent tool for the serious practitioner who is looking to take their skills to the next level!
• Two tension bands mount to the lower sides of dummy, cross over in the back and mount to the opposite side of the stand. This creates the tension needed to keep the dummy facing forward.
• The dummy sits on a swivel base and can pivot 90 degrees to the right and left, always under tension.
• When released, or you change position, the dummy will recoil back to the center position. It will always want to return to the center.
• The base can be locked with two metal pins if you choose to do traditional forms. When youre ready to freestyle, just pull the pins and watch your dummy come alive!
• As with all our stands, you have a height adjustment of 3" to accommodate multiple users.
• Stand color: Black
• Stand is 70" tall and 8" wide

ABOUT THE DUMMY

• Please see our FAQs for delivery time frames and other common questions.
• This Jeet Kune Do dummy is designed for the JKD/Mixed Martial Arts practitioner
• Dummy body can be used with any of our stands
• The spacing between the arms and leg is the same as the traditional dummy.
• Standard dummy body is 60" tall and 9" in diameter.
• There is 8.5" from mid arm to upper arm and from mid arm to leg
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Arm pegs are 1.5" x 2" (much stronger than the standard 1.5" x 1.5")
• Our striking head pad works perfectly with the JKD neck
• 3" solid Ash or 2" metal* leg available. Our new Ash legs are rounded rather than square.
• Weighs 85 lbs.

*The metal and ash legs require different sized peg holes, they are not interchangeable (i.e. If you purchase an ash leg and decide later you want metal instead, it will not fit the dummy.)

• Some assembly is required, but it does not require mounting. Mounting to the floor is optional.
• Stand comes with mounting brackets which are adjustable in height. Just mount your brackets where you need them. For multiple users who require two different height adjustements, you will need to order a second set of brackets.
• Stand is 70" tall x 68" wide x 50" deep
• Weighs 65 lbs.

• Please see our FAQs for delivery time frames and other common questions.
• Dummy body is 60" tall and is 9" in diameter
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Arm pegs are 1.5" x 2", much stronger than the standard 1.5" x 1.5"
• Leg options: 3" x 3" solid Ash or 2" metal*. Our new Ash leg is more rounded than square.
• Body is interchangeable with any of our stands
• The body is constructed with a 14" deep 4" x 4" hole in the bottom to allow it to be used with any of our stands or to be set onto a post in the ground for outdoor training.
• Weighs approx. 80 lbs.
• Ships via Fed Ex to the US & Canada only. Canadian customers, please call for quote.

DUMMY PADS ARE A MUST!

• No mounting or large frame required which is ideal when space is limited!
• Rear platform weight tray can be loaded with a plastic tote filled with 200 lbs. of sand bags, cinder blocks or metal weights or can be mounted directly to the floor.
• Standard stand includes four 3/4" plates allowing height adjustment from 58" to 511". Optional tall stand is available for those over 511" for only $30.
• Front of base width is 11". Back width is 36". Front to back of base is 35.5".

ABOUT THE DUMMY

• Please see our FAQs for delivery time frames and other common questions.
• Dummy body can also be used with any of our other stands
• The spacing between the arms and leg is the same as the traditional dummy
• Standard dummy body is 61" tall and 9" in diameter
• There is 8.5" from mid arm to upper arm and from mid arm to leg
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Our striking head pad works perfectly with the JKD neck
• Arm pegs are 1.5" x 2", much stronger than the standard 1.5" x 1.5"
• 3" solid Ash or 2" metal* leg available. Our new Ash legs are rounded rather than square.
• Weighs 85 lbs.

DUMMY PADS ARE A MUST!

Once you get your dummy, you'll want to get training right away! So, to prevent injury and enable you to go "all out" on your dummy, we suggest purchasing head and body striking pads.

*The metal and ash legs require different sized peg holes, they are not interchangeable (i.e. If you purchase an ash leg and decide later you want metal instead, it will not fit the dummy.)

• Rear platform weight tray can be loaded with a plastic tote filled with 200 lbs. of sand bags, cinder blocks or metal weights or can be mounted directly to the floor.
• No mounting or large frame required.
• Standard stand includes four 3/4" plates allowing height adjustment from 58" to 511" or purchase our optional tall stand for those over 511".
• Front of base width is 11". Back width is 36". Front to back of base is 35 1/2".
• All of our dummies are interchangeable with any of our stands.

ABOUT THE DUMMY

• Please see our FAQs for delivery time frames and other common questions.
• Dummy body is 60" tall and is 9" in diameter
• 100% Ash arms measure 12.5" long and are off set (level arms available).
• Arm pegs are 1.5" x 2", much stronger than the standard 1.5" x 1.5"
• Leg options: 3" solid Ash or 2" metal. Our new Ash leg is more rounded than square.
• The body is constructed with a 14" deep 4" x 4" hole in bottom to allow it to be used with any of our wallmount stands or it can be set onto a post in the ground for outdoor training.
• Weighs approximately 120 lbs. with stand

DUMMY PADS ARE A MUST!

• It has a flex to it and gives your dummy great action when training.
• Includes four adjustable brackets to allow for a custom height adjustment from 55" - 65". For multiple users, you will need to purchase a second set of brackets.
• Requires no assembly and easily mounts to your wall with six 3" screws.
• Stand is 70" tall x 11" wide. The width of the mounted stand can be set from 36" wide to 68" wide to suit your training needs.
• The farther apart you set the stand towers, the more action you get!

ABOUT THE DUMMY

• Dummy body is 60" tall and is 9" in diameter
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Arm pegs are 1.5" x 2", much stronger than the standard 1.5" x 1.5"
• Leg options: 3" x 3" solid Ash or 2" metal
• Body is interchangeable with any of our stands.
• The body is constructed with a 14" deep 4" x 4" hole in the bottom to allow it to be used with any of our stands or to be set onto a post in the ground for outdoor training.
• Weighs approx. 80 lbs.
• Ships via Fed Ex to the US & Canada only. Canadian customers, please call for quote.

Designed for the JKD/Mixed Martial Arts Practitioner!

• Please see our FAQs for delivery time frames and other common questions.
• This dummy body does not include a stand
• Stands sold separately or available as a set
• The spacing between the arms and leg is the same as the traditional dummy.
• Standard dummy body is 61" tall and 9" in diameter.
• There is 8.5" from mid arm to upper arm and from mid arm to leg
• 100% Ash arms measure 12.5" long and are off set (level arms available)
• Arm pegs are 1.5" x 2" (much stronger than the standard 1.5" x 1.5")
• Our striking head pad works perfectly with the JKD neck
• 3" solid Ash or 2" metal* leg available. Our new Ash legs are rounded on the edges rather than square.
• Weighs 85 lbs.

Dummy Pads Are A Must!

*The metal and ash legs require different sized peg holes, they are not interchangeable (i.e. If you purchase an ash leg and decide later you want metal instead, it will not fit the dummy.)

• This stand only fits our dummies.
• Please see our FAQs for delivery time frames and other common questions.
• The Recoil Reaction Dummy Stand is one of our newest and most exciting training tools weve ever had to offer!
• This patent pending design takes your Wooden Dummy training to the next level by applying tension and recoil to dummy.
• See it pictured here with our Traditional Mook Jong Dummy.
• Little assembly is required and easily mounts to any solid wall or wooden post.
• This is also a great space saving stand. Out of all of our dummies, this one takes up the least amount of room.
• The two main principles this stand offers you is recoil and reaction. Recoil, in that it will always recoil back to the center position after released. This means the deflection of the arms when blocked provide energy back toward you as in defending an actual strike. Reaction, in that you develop faster reflexes due to the fact that the dummy will "hit you back".
• This is an excellent tool for the serious practitioner who is looking to take their skills to the next level!
• Two tension bands mount to the lower sides of dummy, cross over in the back and mount to the opposite side of the stand. This creates the tension needed to keep the dummy facing forward.
• The dummy (sold separately) sits on a swivel base and can pivot 90 degrees to the right and left, always under tension.
• When released, or you change position, the dummy will recoil back to the center position. It will always want to return to the center.
• The base can be locked with two metal pins if you choose to do traditional forms. When youre ready to freestyle, just pull the pins and watch your dummy come alive!
• Height adjustment of 3 to accommodate multiple users.
• Taller stand available for those over 511" for only $30.
• Stand color: Now in black only
• Stand is 70" tall and 8" wide

• Made from Ash.
• Ash is as hard as red oak and used in baseball bats and axe handles.
• Available in one of our signature finish colors.
• Unfinished legs available also.
• Leg pegs measure 2" by 2" (stronger than the standard 1.5" square peg).
• Backed by our 3 year limited warranty*
• No returns on dummy legs.
• Manufacturing time for legs is generally 2 weeks.

• Made from Ash.
• Ash is as hard as red oak and used in baseball bats and axe handles.
• Finished legs available also.
• Leg pegs measure 2" by 2" (stronger than the standard 1.5" square peg).
• Backed by our 3 year limited warranty*
• No returns on dummy legs.
• Manufacturing time for legs is generally 2 weeks.

• If you're like us you'll really want to punch your dummy, so we highly recommend striking pads.
• If you have a JKD dummy, we suggest and recommend using the head pad especially when performing fist or elbow striking techniques to the neck. They will give you the added protection you need during training and the pads work great with the JKD neck.
• For a JKD dummy the pads are reversed (i.e. head pad for the body & body pad for the head).
• Pads are made from Vinyl and are available for the head or body
• Features hook & loop closures for full contact strikes to your wooden dummy
• Head pad is split to allow it to be removed without removing the dummy from the wallmount stand
• Fits any 9" diameter wooden dummy
• Available in black only.

• Finished arms come standard in Ash hard wood.
• Ash is as hard as red oak and is used in the manufacturing of baseball bats and axe handles. All arms are available in any of our signature finish colors.
• Arm pegs measure 1.5" by 2" (stronger than the standard 1.5" square peg).
• The length of the square portion of the arm that fits into the dummy body is 12.
• Unfinished arms available also available.
• Sold individually or as a set of three.
• Backed with our 3 year limited warranty.*
• No returns on dummy arms.
• Manufacturing time for arms is generally 2 weeks.

• Chapter 1 - A Description of the Origin & Development of the Wing Tsun Dummy
• Chapter 2 - Illustrations of the Wooden Dummy Techniques
• Chapter 3 - Applications & Explanations of the Wing Tsun Dummy Techniques
• Chapter 4 - Story of My Father - Yip Man The Great Grandmaster of the Wing Tsun Style Terminology